EDECOA 3500W DC 12V AC 220V 230V pure sine wave power inverter bluetooth-compatible

Features

• High quality DC to AC pure sine wave.
• The main control chip adopts high-speed and stable MCU, intelligent control, real-time monitoring, AC output frequency is more accurate, and the work is more stable.
• With bipolar SPWM drive, the output sinusoidal waveform is more accurate and the inductive load capacity is stronger.
• Multiple protection functions: input low voltage shutdown protection, input high voltage shutdown protection, battery high and low voltage alarm, overload protection, output short circuit protection, overheating protection, input reverse protection.
• Automatic reset function: After input high voltage or low voltage shutdown, when the input voltage returns to normal, the inverter will automatically restore the output voltage.
• Soft start function, it is easier to run inductive and capacitive loads.
• Buzzer reminder device, once the protection of the inverter is triggered, the buzzer sounds an alarm to remind people.
• The aluminum casing is anodized, which not only has a beautiful appearance, but also has good heat dissipation performance, wear resistance, insulation, and durability.
• Dual intelligent temperature control fan to reduce unnecessary waste of battery power; When the internal temperature of the inverter is ≥45±5°C, the fan starts to work.
• EB-RC remote controller. The remote controller not only monitors the battery inverter and status in real time, but also allows you to set the battery type, output voltage, frequency, turn on or off ECO mode, alarm buzzer, and adjust the LCD brightness via the remote controller buttons. The remote controller port is standard RJ45, you can replace a longer cable to increase remote controller distance.
• Bluetooth-compatible function. Connect your mobile phone via Bluetooth-compatible function to monitor the status of the inverter and set parameters in real time on the EDECOA APP.
• OTA upgrade function. Upgrade the firmware of the remote control and inverter.
• Dual USB port, output voltage 5V, maximum current 2.1A, can charge mobile phones and tablets.
• ECO mode. ECO mode can effectively save the inverter no-load standby losses and extend the battery life compared to the traditional on mode. ECO mode is not recommended for loads with less than 15W.
• Screw terminal. Pluggable plug for easy cable replacement.

Specification